Yamaha AW16G Recording 101 Manuel du propriétaire - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha AW16G Recording 101. Yamaha AW16G Recording 101 27 pages. Professional audio workstation
Imprimer la page
If a condenser microphone is to be connected
If a condenser microphone is to be connected
to either input 1 or 2, the phantom power must be
to either input 1 or 2, the phantom power must be
turned on.
turned on.
The Hi-Z input should be used to connect electric guitars or basses with
The Hi-Z input should be used to connect electric guitars or basses with
passive electronics to the AW16G. If the guitar or bass has active electronics, or
passive electronics to the AW16G. If the guitar or bass has active electronics, or
is going through an effects device before being connected to the AW16G, then
is going through an effects device before being connected to the AW16G, then
one of the regular 1/4-inch TRS inputs should be used.
one of the regular 1/4-inch TRS inputs should be used.
Step 3: Turn the Equipment on.
Step 3: Turn the Equipment on.
The final step before you can begin recording is to turn all of the
The final step before you can begin recording is to turn all of the
equipment on. When turning the equipment on the following order should be
equipment on. When turning the equipment on the following order should be
used:
used:
1.
1.
Turn on external devices such as audio sources and effects processors
Turn on external devices such as audio sources and effects processors
connected to the AW16G.
connected to the AW16G.
2.
2.
Turn on the AW16G.
Turn on the AW16G.
3.
3.
Turn on the monitoring system connected to the AW16Gs Monitor
Turn on the monitoring system connected to the AW16Gs Monitor
Outputs.
Outputs.
This will prevent damage to the speakers. If the monitoring system is
This will prevent damage to the speakers. If the monitoring system is
turned on first, then when the AW16G and the other equipment is turned on a loud
turned on first, then when the AW16G and the other equipment is turned on a loud
'pop' will be produced which may damage the speakers.
'pop' will be produced which may damage the speakers.
When turning the equipment off the reverse order should be used:
When turning the equipment off the reverse order should be used:
1.
1.
Turn off the monitoring system connected to the AW16Gs Monitor
Turn off the monitoring system connected to the AW16Gs Monitor
Outputs.
Outputs.
2.
2.
Turn off the AW16G. To access the AW16Gs shutdown screen press the
Turn off the AW16G. To access the AW16Gs shutdown screen press the
[SONG] key until the SONG SHUTDOWN screen appears then cursor to
[SONG] key until the SONG SHUTDOWN screen appears then cursor to
SHUTDOWN and press the [ENTER] key.
SHUTDOWN and press the [ENTER] key.
3.
3.
Turn off external devices such as audio sources and effects processors
Turn off external devices such as audio sources and effects processors
connected to the AW16G.
connected to the AW16G.
5 5