Yamaha AW4416 Supplément au manuel - Page 19

Parcourez en ligne ou téléchargez le pdf Supplément au manuel pour {nom_de_la_catégorie} Yamaha AW4416. Yamaha AW4416 48 pages. Installing an internal hard disk
Également pour Yamaha AW4416 : Manuel complémentaire (1 pages), Tutoriel (34 pages), Manuel complémentaire (20 pages), Manuel (3 pages)

Yamaha AW4416 Supplément au manuel
Additional functionality for Auto-
mix
Due to the addition of the MIDI Remote function,
MIDI Remote operations can now be recorded/edited
in the automix.
Recording/playing back MIDI
Remote operations in automix
1
In the AUTOMIX screen Main page, make
sure that the OVERWRITE area FADER but-
ton (if you want to record fader opera-
tions) or the CH ON button (if you want to
record [ON] key operations) is turned on.
2
Put the automix in record-ready mode.
3
Access the REMOTE screen, and press one
of the [F1]–[F4] keys to select the mixing
layer (Remote A or Remote B) that you
want to operate.
Remote A operations will be recorded if you
press the [F1]/[F2] keys, and Remote B opera-
tions will be recorded if you press the [F3]/[F4]
keys.
4
Make sure that the two buttons (1-8, 9-16)
of the REMOTE A area or REMOTE B area
are set to ENABLE.
If the 1-8 or 9-16 button reads DISABLE, the corre-
sponding faders and [ON] keys will have no effect.
5
Begin playing back the song.
6
Use the [SEL] keys to select the fader or
[ON] key that you want to record, and
operate the fader/[ON] key.
While the REMOTE screen is displayed, operat-
ing the faders or [ON] keys will cause the opera-
tions to be recorded in automix as MIDI Remote
events.
7
Stop the song.
When you defeat automix recording mode and
play back the song from the beginning, the MIDI
Remote operations you recorded will be repro-
duced.
Tip!
If necessary, you can switch REMOTE pages and use
another mixing layer (REMOTE A or REMOTE B) to
record additional MIDI Remote operations onto the
automix. By using this method, you can record up to
32 channels of fader/[ON] key operations.
Off-line editing of the recorded
automix
1
Access the AUTOMIX screen Event List
page.
2
In the OVERWRITE area, move the cursor to
the FADER button (if you want to edit fader
operations) or the CH ON button (if you
want to edit [ON] key operations), and
press the [ENTER] key.
Only the fader operations or [ON] key opera-
tions will be displayed in the event list. (However
at this stage, MIDI Remote events will not be dis-
played.)
Version 2.0 Manual Supplement
19