Yamaha Baritone Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha Baritone. Yamaha Baritone 22 pages. Alto/baryton/euphonium/tuba/sousaphone
Également pour Yamaha Baritone : (Mode D'emploi (22 pages)

Imprimer la page

Apply some lever oil to the lever shafts.

Lever oil

* Do not apply too much oil

While moving the levers, blow some air

through the instrument to distribute the oil

evenly.

Before You Play

■ Assembling the Sousaphone

Connect the bell to the body so that the bell is

facing the same direction as the player's face.

Completed assembly

Loosen the bell screws. Firmly holding on

to the bell on both sides, rotate the bell

slowly while inserting the bell into the bell

joint on the main body. After the bell is po-

sitioned, tighten the three bell screws so that

each screw applies the same amount of

pressure against the bell.

* During rests, make sure that the bell

screws are tightened firmly.

Never loosen the screws on the copper

bracing holding the main coils together.

Doing so may cause the coils to separate

resulting in injury. Also, regularly check

that the attachment screws on the main

tubing are tightened firmly.

Attachment

screw

Bell joint receiver

Bell screw

Copper bracing

Main coil