Yamaha Clavinova CLP-525 Manuel du propriétaire - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha Clavinova CLP-525. Yamaha Clavinova CLP-525 38 pages.
Également pour Yamaha Clavinova CLP-525 : Manuel d'utilisation rapide (2 pages)
Appendix
Troubleshooting
Problem
Power suddenly and unexpectedly turns off.
The instrument does not turn on.
A click or pop is heard when the power is
turned on or off.
Noise is heard from the speakers or
headphones.
Noise is heard from the instrument's speakers or
headphones when using the instrument with the
application on iPhone/iPad.
The overall volume is low, or no sound is heard.
Pedals do not function.
The damper pedal does not function as
expected.
28
CLP-525 Owner's Manual
Possible Cause and Solution
This is normal and the Auto Power Off function may have been activated
(page 12). If desired, disable the Auto Power Off function.
Securely insert the adaptor plugs into the socket on this instrument and into
a proper AC outlet (page 11).
This is normal when electrical current is being applied to the instrument.
The noise may be due to interference caused by the use of a mobile phone
in close proximity to this instrument. Turn off the mobile phone, or move it
further away from this instrument.
When you use the instrument along with the application on your iPhone/
iPad, we recommend that you set "Airplane Mode" to "ON" on your iPhone/
iPad in order to avoid noise caused by communication.
The Master Volume is set too low. Set it to an appropriate level using the
[MASTER VOLUME] knob (page 13).
Make sure a pair of headphones is not connected to the headphones jack
(page 12).
Make sure that Local Control is On. For details, refer to the "MIDI
Reference" (page 8).
The pedal cord may not be securely connected to the [TO PEDAL] jack. Be
sure to insert the pedal cord all the way until the metal part of the cord plug
disappears from view (page 30).
The damper pedal was pressed when the power was turned on. This is not
a malfunction; release the pedal and press it again to reset the function.