Yamaha Clavinova CVP-20 Manuel du propriétaire - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha Clavinova CVP-20. Yamaha Clavinova CVP-20 27 pages. Clavinova
Également pour Yamaha Clavinova CVP-20 : Manuel du propriétaire (27 pages), Manuel du propriétaire (26 pages), Manuel du propriétaire (26 pages)
Imprimer la page
Before Playing
INSTALLATION WN
=
. Refer to your "Assembly Instructions"? manual to ensure correct
assembly. The Clavinova leg assemblies were not designed to ac-
commodate additional weight.
WARNING: Do not allow your Clavinova or its bench to rest on
or be installed over power cords of any type. An electrical shock
and/or fire hazard could possibly result from this type of im-
proper installation.
WARNING: Do not place objects on your Clavinova power cord
or place it in a position where anyone could trip over, walk on or
roll anything over it. An improper installation of this type creates
a personal injury/fire hazard possibility.
Main
Power
Supply Verification:
Your Clavinova
has been
manufactured specifically for the main power supply voltages
used in your area. If you should move, or if any doubt should ex-
ist, please consult
your
Yamaha
Clavinova
dealer
for in-
structions.
The main power supply voltage is printed on the name plate. The
name plate of the CVP-20 is on the bottom of the main body. In
some areas a voltage selector may be provided on the rear panel
of the main body. Make sure that the voltage selector is set for
the voltage in your area.
Environment: Your Clavinova should not be installed in a posi-
tion that exposes the cabinet to direct sunlight or air currents
having high humidity or heat levels. This type of installation can
cause contact oxidation, case joint separation, and cabinet finish
problems.
Vinyl Products: Do not set vinyl items, (i.e., headphones, vinyl
doilies, etc.) on the finished surfaces of your Clavinova or use a
polyvinyl material to cover the unit for any extended period of
time. A chemical reaction may occur between the finish chemi-
cals and those contained in the polyvinyl products resulting in a
permanent marring of the finish.
Electromagnetic interference (RFI): Your Clavinova has been
type tested and found to comply with all applicable regulations.
However, if it is installed in the immediate proximity of other
electronic devices, some form of interference may occur.
Name Plate Location
The nameplate is located on the bottom panel.
Your Clavinova does not require professional installation or routine main-
tenance. However, it is IMPORTANT to be aware of the following.
MAINTENANCE II
1.
2.
SERVICE: Your Clavinova contains no user serviceable compo-
nents. Refer all service to qualified service technicians only.
BENCH
STRUCTURAL
INTEGRITY
(Bench optional): If
any motion or an ""unsteady"" sensation is noted in the bench,
please check its structual integrity immediately. Discontinue use
until any and all discrepancies are resolved. The bench was
designed for seating only. No other applications are recom-
mended.
POWER: When not in use, always turn your Clavinova '*OFF",
CLEANING/CARE
A) GENERAL:
DO NOT use chemically harsh (i.e. alcohol,
paint thinner, etc.) or abrasive cleaners on any portion of your
Clavinova.
B) KEYS/CONTROL
PANEL:
When cleaning the keys and
control panels of your Clavinova, please use a soft absorbent-
type cloth that has been dampened with a very mild solution of
liquid soap and lukewarm water.
C) CABINET:
Clean the cabinet portions of your Clavinova
with a slightly dampened cloth containing a neutral cleaning
agent. The cleaning agent selected should not contain a high wax
content or any other substance that would have a tendency to
form a '*build-up" on the cabinet finish.