Yamaha disklavier Mark III Series Manuel d'utilisation avancée - Page 34
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation avancée pour {nom_de_la_catégorie} Yamaha disklavier Mark III Series. Yamaha disklavier Mark III Series 39 pages. Playback models
Également pour Yamaha disklavier Mark III Series : Manuel de maintenance (50 pages), Brochure & Specs (20 pages), Manuel d'utilisation (49 pages)
Imprimer la page
☛ You can title your new recording either now
or after recording. See "Song Titling and
Title Editing" on page 22.
☛ If you want to record your L/R song using
the metronome, see "Recording with the
Metronome" on page 24.
☛ If you want to record a pedal count-in, see
"Recording a Pedal Count-In" on page 34.
3
Press a [PART] button to select the
part that you want to record first.
This function will record the left-hand part
first, unless you specify otherwise.
To record the right-hand part first, press
[PART L] to unselect the left-hand part,
then press [PART R].
☛ For existing songs, you must select the
track. See "Recording Ensemble Tracks" on
page 37.
The PART indicator of the selected part
lights red.
4
Press [PLAY/PAUSE].
The PLAY/PAUSE indicator stops flashing,
and the following display appears.
This Disklavier is now ready for you to
play the first part.
5
Recording begins when you start
playing.
As soon as you play the keyboard or press a
pedal, recording starts.
30
6
When you finish playing the first
part, press [STOP].
The first L/R part is saved to disk.
Recording the Second Part
1
Press [REC] to engage the Record
Standby mode.
The REC indicator lights and the
PLAY/PAUSE indicator flashes.
2
Press [SONG SELECT
the song number of the previous
recording.
A new song number is always created for a
new recording. Therefore, you must return
to the previous song number when
recording the second part of an L/R song.
☛ If you want to change the song's tempo
before recording the second part, see
"Changing the Default Song Tempo" on
page 26.
3
Press a [PART] button to select the
next part for recording.
The PART indicator of the selected part
lights red.
☛ If you do not want to monitor the first part
or you want to re-record the pedal part, see
step 4 of "Re-Recording One Part" on page
33.
4
Press [PLAY/PAUSE] to start
recording.
Playback of the first part starts
immediately, so be sure that you are ready
to play the second part along with it.
] to select