Yamaha DM 2000 Version 2 Manuel d'installation - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 28 pages. Version 2
Également pour Yamaha DM 2000 Version 2 : Manuel du propriétaire (44 pages), Manuel d'installation (14 pages), Manuel d'installation (22 pages), Manuel d'installation du logiciel (13 pages), Manuel du propriétaire (1 pages), Manuel complémentaire (4 pages), Manuel du propriétaire (37 pages), Manuel de configuration (35 pages), Manuel d'orientation (8 pages), Manuel de redondance (8 pages), Manuel du propriétaire (3 pages), (French) Guide d'installation du système d'exploitation (13 pages)

Chapter 4—Getting Started

4 Getting Started

The following procedure uses "DM1000" as an example. The content of the menu items

selected in the procedure below may vary depending on the version number of Studio Man-

ager software.

Windows: Click the Start button and then click Programs–>(YAMAHA OPT

Tools–>)YAMAHA Studio Manager for DM1000–>Studio Manager for DM1000.

Macintosh: Open the Studio Manager for DM1000 folder and double-click "SM_DM1K."

If your Yamaha mixing console is detected while Studio Manager starts up, the Synchroni-

zation dialog box appears, from which you can choose to transfer the settings of your

Yamaha mixing console to Studio Manager or vice versa. See "Synchronizing Studio Man-

ager" on page 22 for more information. If no Yamaha mixing console is detected, a new

Console window opens.

Choose Exit (Quit on the Macintosh) from the File menu.

If there are no unsaved changes, all windows close and Studio Manager quits. If there are

unsaved changes, a message asking whether or not you want to save the changes appears.

Click Yes to save the changes and quit, click No to quit, or click Cancel to cancel the opera-

tion. Studio Manager can also be quit by clicking the Console window's Close button.

Specifying the MIDI Port (DM1000/01V96 & Windows only)

Before selecting a MIDI port in Studio Manager (page 21), you must specify which MIDI

port is connected to your DM1000.

Start Studio Manager.

Click the MIDI Setup button on the MIDI SETUP toolbar, as shown below.

The MIDI Setup dialog box appears.

Select the MIDI port to which your DM1000 is connected (e.g., MIDI In, Out,

or Thru).

Note: To use a MIDI port with Studio Manager, you must select it on the MIDI Setup dialog

box (as explained above) and on the System Setup dialog box, as explained on page 21.

Warning: Studio Manager does not yet support OPT (Open Plug-in Technology), so even if

it appears in the menu of an OPT compatible program, do not start it in this way.

Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide

The ONLINE indicator is displayed while Studio Manager is connected to

your Yamaha mixing console. When no Yamaha mixing console is detected,

the OFFLINE indicator is displayed.

MIDI Setup