Yamaha DM 2000 Version 2 Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 14 pages. Version 2
Également pour Yamaha DM 2000 Version 2 : Manuel du propriétaire (44 pages), Manuel d'installation (28 pages), Manuel d'installation (22 pages), Manuel d'installation du logiciel (13 pages), Manuel du propriétaire (1 pages), Manuel complémentaire (4 pages), Manuel du propriétaire (37 pages), Manuel de configuration (35 pages), Manuel d'orientation (8 pages), Manuel de redondance (8 pages), Manuel du propriétaire (3 pages), (French) Guide d'installation du système d'exploitation (13 pages)

Imprimer la page
Yamaha DM 2000 Version 2 Manuel d'installation
16
Select the I/O ports specified in Step 8, then
click [Next].
A window indicating the installation progress opens, and
the Add-On Effects package is installed.
17
When the installation is complete, the following
window opens.
18
Select [Start online user registration], then click
[Finish].
The browser starts and the user registration page opens.
User registration entitles you to additional information
and support.
19
Turn off the power to the console, then turn it
on.
The console starts in normal mode.
20
Access the EFFECT LIBRARY page, and verify
that the Add-On Effects you purchased are
displayed and that you are able to recall them.
The installation is now complete.
NOTE: If you want to continue installing other add-on effects,
you must power-cycle the console and repeat the procedure from
step 2.

Indirect installation

If you access the Internet from another computer (#2), not
from the computer (#1) connected to the console, follow the
steps below to install the software.
NOTE: The following instruction refers to the installation of the
software in the 02R96 from a connected computer that runs
Windows 98SE. However, the basic installation procedure also
applies to any OS or console. Steps that vary with different
operating systems will be explained separately.
NOTE: If an error message appears, refer to the Error Message
list on page 11.
Follow Steps 1 through 11 (on page 5) using computer #1,
then proceed with the following.
12
Select [Save registration code to get access key
later.], then click [Next].
The following window opens.
13
Click [Save in file] to save the PRODUCT ID and
registration code as a text file.
You can also write down the ID and code on a piece of
paper.
14
Copy the text file to the computer (#2) that has
access to the Internet.
Follow the steps below on computer #2.
15
Insert the included CD-ROM into the CD-ROM
drive on computer #2, locate the Upgrade
folder on the CD-ROM ("Mac OS 9: Upgrade"
for Mac OS 9; "Mac OS X: Upgrade" for Mac OS
X), then copy the folder onto the hard disk.
16
Double-click "DMUpgrade.exe" (or
"AE***UpgradeE" for Mac OS) in the Upgrade
folder that you copied to the hard disk.
The installer window opens.
Add-On Effects Installation Guide
7