Yamaha DM 2000 Version 2 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 37 pages. Version 2
Également pour Yamaha DM 2000 Version 2 : Manuel du propriétaire (44 pages), Manuel d'installation (28 pages), Manuel d'installation (14 pages), Manuel d'installation (22 pages), Manuel d'installation du logiciel (13 pages), Manuel du propriétaire (1 pages), Manuel complémentaire (4 pages), Manuel de configuration (35 pages), Manuel d'orientation (8 pages), Manuel de redondance (8 pages), Manuel du propriétaire (3 pages), (French) Guide d'installation du système d'exploitation (13 pages)

Chapter 1—Getting Started

1 Getting Started

Windows: Click the Start button and then click Programs–>YAMAHA Studio Manager for

DM2000–>Studio Manager for DM2000.

Macintosh: Open the Studio Manager for DM2000 folder and double-click "SM_DM2K."

If a DM2000 is detected while Studio Manager starts up, the Synchronization dialog box

appears, from which you can choose to transfer the settings of the DM2000 to Studio Man-

ager or vice versa. See "Synchronizing Studio Manager" on page 3 for more information. If

no DM2000 is detected, a new Console window opens.

Note: This version of Studio Manager supports DM2000 System Software V1.10 or later. If used

with an earlier version, some functions (e.g., the Library Undo function) may not work properly.

Choose Exit (Quit on the Macintosh) from the File menu.

If there are no unsaved changes, all windows close and Studio Manager quits. If there are

unsaved changes, a message asking if you want to save the changes appears. Click Yes to save

the changes and quit, click No to quit, or click Cancel to cancel the operation. Studio Man-

ager can also be quit by clicking the Console window's Close button.

Conﬁguring Studio Manager

Selecting Ports

In order to use Studio Manager, you must specify the input and output ports that Studio

Manager should use to communicate with the DM2000.

Windows: Choose System Setup from the File menu, and specify the input and output ports

on the Setup dialog box, as shown below.

Macintosh: Choose Select OMS Ports from the File menu, and specify the input and output

ports (device names set in OMS Studio Setup) on the Setup dialog box, as shown below.

Note: Choose OMS MIDI Setup from the File menu, and make sure that the "Run MIDI in

Background" option is on.

OMS Studio Setup can be opened directly from Studio Manager by selecting OMS Studio

Setup from the File menu.

Studio Manager for DM2000 V1.1—Owner's Manual

The ONLINE indicator is displayed while Studio Manager is connected to a

DM2000. When no DM2000 is detected, the OFFLINE indicator is displayed.