Yamaha DTX900M Manuel de mise à jour du micrologiciel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de mise à jour du micrologiciel pour {nom_de_la_catégorie} Yamaha DTX900M. Yamaha DTX900M 4 pages.
Également pour Yamaha DTX900M : Manuel de mise à jour du micrologiciel (5 pages)
Imprimer la page
How to update the firmware
IMPORTANT
Please save your important data onto the USB storage device before updating the
firmware of the DTXTREME III/DTX900/DTX900M.
NOTICE
DO NOT power off or remove the USB storage device from the product during the
updating process. Your DTXTREME III/DTX900/DTX900M may become inoperable.
1. After downloading, decompress the archived file, and then find the "***.PGM" file.
Copy the "***.PGM" file to the USB storage device.
2. Make sure to turn the power off (the Standby/On switch is set to the Standby
position (
) ) , and then connect the USB storage device to the USB TO DEVICE
terminal on the rear panel.
3. Hold down the [F1] and [REC] buttons simultaneously, and then turn the power on
(
) by pressing the Standby/On switch on the rear panel.
4. Press the [ENTER] button to start the update process.
This process takes a few minutes.
5. When the update process is completed, following message will appear, and you can
turn the power off (the Standby/On switch is set to the Standby position (
DTXTREME III： Completed. Reboot DTXTREME III.
DTX900/DTX900M： Completed. Reboot DTX900.
6. Check the version of the firmware by following the instructions in "How to check the
version of your DTXTREME III/DTX900/DTX900M" in this document, and confirm
that your product has been successfully updated.
This concludes the update process.
C.S.G., DMI Development Division, Yamaha Corporation
4
©2010-2014 Yamaha Corporation
) ).