DirectConnect 43136 Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DirectConnect 43136. DirectConnect 43136 10 pages. 16-port gigabit ethernet unmanaged switch
Imprimer la page
16-Port Gigabit Ethernet Unmanaged Switch
Figure 4 - mounting bracket
B.
Use the screws provided with the equipment rack to mount the Switch on the rack and tighten it.
Figure 5 - Install into the rack
3.2.3. Power on the Switch
The Switch is powered on by an external power supply. Please follow the tips to connect.
DC Electrical Outlet: Receptacle with neutral outlet or multifunctional computer professional receptacle
is strongly recommended. Please verify the ground connector is in good condition and can work properly
on the outlet.
DC Power Cord Connection: Connect the DC power connector in the back panel of the Switch to an
external receptacle with the power adapter, and check the power indicator is ON or OFF. When it is ON,
it indicates the power connection is OK.
3.3.
Connecting the Switch
Please insert the NIC into the computer, after installing network card driver, please connect one end of
the twisted pair to RJ-45 jack to your computer, the other end will be connected to any RJ-45 port on the
Switch. The maximum distance between the Switch and computer is around 100 meters. Once the
connection is OK and the devices are powered on normally, the Link/Act/Speed status indicator of
corresponding ports of the Switch will be lit.
Note:
If the LED indicators don't light up, please check the power supply and its connection.
5