Yamaha Silent Viola SV130S Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha Silent Viola SV130S. Yamaha Silent Viola SV130S 14 pages. Yamaha silent violin owner's manual

Imprimer la page

■ Tuning

The Silent Violin is shipped from the factory with the bridge unfitted. First, set up

the bridge and then proceed with tuning.

• The lower side of the bridge supports the 1st string

(E), the higher side supports the 4th string (G).

Make sure the bridge is placed properly, then set the

bridge in the bridge seat. The side of the bridge with

the AUBERT logo should face the tailpiece.

• Ensure that the bridge stands vertically. If it leans to

one side, use both hands to adjust. Make sure that

each string passes over the corresponding slits in

the bridge.

• The strings are tuned to the following pitches. The

1st string is tuned to E, the 2nd string to A, the 3rd

string to D, and the 4th string to G.

Use a piano, tuning fork, tuner, etc., and adjust the

pitch of each string using the tuning pegs. When

rotating the peg, apply firm pressure towards the head

stock.

• After tuning is complete, make sure the bridge is

still properly aligned. If the bridge is leaning in ei-

ther direction, slightly loosen the strings and care-

fully re-align the bridge using both hands.

• Finally, use the adjuster to fine tune the strings.

Setup

4th string

Properly aligned

Poor alignment

Caution

Slit

[Looking from the tailpiece]

Escutcheon

Body

Poor alignment

[Bridge is placed vertically]

• If the adjuster is too loose,

it could produce noise while

playing.

Don't loosen too much.

1st string

Tailpiece