Yamaha TENORI-ON TNR-W Manuel rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Yamaha TENORI-ON TNR-W. Yamaha TENORI-ON TNR-W 29 pages.

Yamaha TENORI-ON TNR-W Manuel rapide

Power Supply

Either the supplied AC Adaptor (PA-3C, PA-130 or equivalent Yamaha adaptor) or six "AA" alkaline
batteries can be used to power the TENORI-ON. (The TNR-O model can only be powered from an AC
power adaptor. Batteries cannot be used.)
Connecting the AC Adaptor
Make sure the TENORI-ON STANDBY/ON
switch is set to the STANDBY position.
Connect the AC adaptor DC plug to the DC IN
connector, and then plug the AC adaptor's AC
plug into an appropriate AC power outlet.
Use only the supplied PA-3C,
PA-130 or an equivalent Yamaha
AC adaptor.
Use only alkaline batteries when
powering the TENORI-ON from
batteries. (TNR-W only)
Performance Styles
Hand-held Performance
Hold the TENORI-ON firmly on both sides. You should be
able to use your thumbs to operate the function buttons,
LED buttons, and the jog dial.
If you can't reach some of the LED
buttons with your thumbs, or need to
maximum operation speed, you can
alternatively hold the TENORI-ON
firmly with one hand while operating
the LED buttons with your free hand.
Power Supply Preparation and Switching On /
Installing Batteries
(TNR-W only)
Make sure the TENORI-ON STANDBY/ON
switch is set to the STANDBY position, and
remove the battery compartment covers (there
are two battery compartment covers) from
either side of the back of the instrument.
Install six "AA" alkaline type batteries, three
on each side, with the orientation shown
in the illustration and replace the battery
compartment covers.
Table-top Performance
The TENORI-ON can be operated
while placed on a table, desk, or any
stable flat surface.
TENORI-ON Performance Styles
Switching On
Slide the STANDBY/ON Switch to the ON
position to turn the power on.
When the power is turned on the status
information will appear on the LCD display,
with the power status indicator in the upper
right corner.
When using the AC adaptor.
=
When using batteries. (TNR-W only)
=
¢
£
Full
Half Full
Almost
Depleted
When the power status indicator
shows that the batteries are almost
depleted £ replace all six batteries with
new ones as soon as possible.
If the batteries fail during a data
store operation, not only might the
data being transferred be lost but the
data in the destination may be lost or
corrupted as well. Use the AC adaptor
when transferring data.
Be careful not to bend the cables
beneath the device or apply
excessive pressure on them. Doing so
can damage the cable and connectors.
Depleted
05