Yamaha TP-3123 Manuel du propriétaire - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha TP-3123. Yamaha TP-3123 11 pages. Pedal timpani tp100 e serie
Également pour Yamaha TP-3123 : Manuel du propriétaire (6 pages)

Imprimer la page

Adjusting the Pitch

■ Tuning Indicator Adjustment

The tuning indicator shows where to set the pedal for each note. After tuning the instrument, you must set each note

on the indicator to its proper position.

After you have tuned your timpani to the lowest

note of its tonal range, make sure that the pointer

is located within 10 mm from the pedal-side end

of the indicator rail.

* If not, refer to "Adjusting the Pointer Position".

Slide the lowest note of the indicator ("A" in the

case of a 26" timpani—see "Standard Tonal

Ranges for Yamaha Timpani" on page 8) to the

position where its center line coincides with the

pointer.

Tune the instrument to the next higher pitch (note)

by moving the pedal, and then slide the corre-

sponding note on the rail to the respective pointer

position. Repeat for each remaining note.

Indicator rail

Pointer

Note

● Adjusting the Pointer Position

First loosen the pointer lock nut and then turn the ad-

juster as follows:

• Pointer is located beyond the lower rail end

when the heel of the pedal is lowered fully (low-

est note).

→ Turn the adjuster to the left (counter clockwise)

until the pointer is aligned with the lowest note

of the indicator.

• Pointer moves beyond the upper rail end before

the toe of the pedal reaches the end of its stroke,

or Pointer does not reach the lower rail end

when the heel of the pedal is lowered fully (low-

est sound)

→ Turn the adjuster to the right (clockwise) to

correct the pointer position as required.

Indicator rail

Adjuster

Note

Pointer

Adjuster nut