Yamaha YCH-585 Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha YCH-585. Yamaha YCH-585 4 pages. Chimes

ASSEMBLY PROCEDURE

Insert the side columns into the base. At

this time, make sure that the damper rest,

attached at the center of the column, and

the short section of the column is positioned

upright.

Side Column

Damper Rest

Fit the damper onto the side columns and

lower the damper onto the damper rest.

Next, secure the damper in its position with

the damper wing bolts. At this time, tighten

the wing bolts that secure the side column

to the base as well.

Damper

Damper Stay

Short Section

Long Section

Base

Side Column

Damper Rest

Remove the damper stay, attached to the

bottom of the damper, loosen the wing bolt

on the damper stay, and attach the stay to

the pedal hook. The pedal's position can be

controlled by adjusting the length of the

pedal stay with its two wing bolts. At this

time, tighten the upper wing bolt first, then

go on to tighten the lower bolt.

Adjust the pedal position so that the pedal

stops slightly above the floor when fully de-

pressed.

Damper Stay

Pedal Hook

Slide the hanger onto the side columns.

Base

Hanger

Side Column