Yamaha YDP-121 Manuel du propriétaire - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha YDP-121. Yamaha YDP-121 40 pages. Yamaha digital piano owner's manual
Également pour Yamaha YDP-121 : Manuel du propriétaire (40 pages)

Imprimer la page

Dual Mode Functions

After selecting "F3. Y ", press the [+/YES] button to engage the dual-mode function sub-

mode, then use the FUNCTION [<] and [>] buttons to select the desired dual mode func-

tion, as listed below.

If the Dual mode is not engaged "F3. - " will appear instead of "F3. Y " and the Dual mode

functions cannot be selected. If this happens engage the Dual mode and proceed.

SHORTCUT: You can jump directly to the dual-mode functions (F3) by pressing the

F3.1: Dual Balance

The volume levels of the two voices combined in the dual mode can be adjusted as re-

quired by using this function. Use the [–/NO] and [+/YES] buttons to adjust the balance as

required. The balance range is from 0 through 20. A setting of "10" produces equal balance

between the two dual-mode voices. Settings below "10" increase the volume of the 2nd Voice

in relation to the 1st Voice, and settings above "10" increase the volume of the 1st Voice in

relation to the 2nd Voice ("1st" and "2nd" is explained on page 14). Press the [–/NO] and [+/

YES] buttons simultaneously to recall the default setting (different for each voice combina-

tion).

You can set one voice as the main voice, and another voice as a softer, mixed voice.

F3.2: Dual Detune

This function makes it possible to detune the 1st and 2nd dual-mode Voices to create a

thicker sound. Use the [–/NO] and [+/YES] buttons to set the amount of detuning as required.

The detune range is from –10 through 10. A setting of "0" sets both voices to the same pitch.

Settings below "0" increase the pitch of the 2nd Voice in relation to the 1st Voice, and settings

above "0" increase the pitch of the 1st Voice in relation to the 2nd Voice ("1st" and "2nd" is

explained on page 14). Press the [–/NO] and [+/YES] buttons simultaneously to recall the

default setting (different for each voice combination).

F3.3: 1st Voice Octave Shift

F3.4: 2nd Voice Octave Shift

Depending on which voices you combine using the dual mode, the combination may sound

better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]

buttons to set the octave of the 1st or 2nd Voice as required ("1st" and "2nd" is explained on

page 14). The available settings are "0" for normal pitch, "–1" to shift the pitch down one

octave, and "1" to shift the pitch up one octave. Press the [–/NO] and [+/YES] buttons simul-

taneously to recall the default setting (different for each voice combination).

F3.5: Reset

This function resets all dual-mode functions to their default values. Press the [+/YES]

button to reset the values. "End" will appear on the display when all functions have been

reset.

[FUNCTION] button while holding the two dual-mode voice selectors.

• Dual mode function settings are set individually for each voice combination.

NOTE

.....................................................................................................................................

.......................................................................................................................................

..........................................................................................................................................................

.............................................................................................................

...........................................................................................................

The Function Mode

YDP-121