Yamaha YM-460 Manuel du propriétaire - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha YM-460. Yamaha YM-460 20 pages. Concert marimbas
Également pour Yamaha YM-460 : Manuel du propriétaire (19 pages)

Yamaha YM-460 Manuel du propriétaire
v
Insert the rails (1) and (4) into the frame ends of the legs.
4-1. Insert the outer rails (1) and (4) in the same way as the inner rails (2) and (3).
A mark "A" is printed on the large end face of the rail (1) and the groove section of the frame end
of the large end leg, and a mark "D" for the rail (4).
b
Set the tone bars.
5-1. While adjusting the long frame, engage the rail clamp on rail (2) and rail (3) with rail (1) and rail (4),
respectively.
Rail clamp
Rail (4)
5-2. Set the natural tone bars first.
With one person holding the suspension cords on the bass side and the other holding the suspen-
sion cords on the treble side securely with both hands, gently place the tone bars on the rails.
Align each tone bar individually and hook its cord onto the corresponding tone bar post.
After confirming that the cord is secured to every tone bar post, fix the tone bars by pulling the
right and left cords forward from the large end side and hooking the two springs into each other.
* When setting the tone bars, use care not to cause any damage to them.
Rail (2)
Small end
Suspension cord
YM-460/460F/410/410F/46/41/2400/2400R
Rail (1)
Rail clamp
Rail (3)
Large end
ASSEMBLY
Suspension cord
Springs
31