Yamaha YVD10 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha YVD10. Yamaha YVD10 11 pages. Vibraphone variable-speed driver
Également pour Yamaha YVD10 : Manuel du propriétaire (11 pages)

Imprimer la page

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or

others, or damage to the units or other property. These precautions include, but are not limited to,

the following:

Handling

• Treating the controller or driver roughly can damage the

internal circuit board, etc.

• Keep small parts out of the reach of infants. Your

children may accidentally swallow them.

• Do not place heavy objects on the units, and do not use

excessive force on the buttons, switches or connectors.

• Never touch the rotating pulleys. Doing so can result in

pinching your fingers, etc.

Assembly

• Assemble the units in the proper sequence by following

the assembly instructions in this manual. Also, make

sure to tighten the screws or bolts regularly. Failure to

do so might result in damage to the units or even injury.

• Use the bolts that comes with the vibraphone.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument.

Always turn the power off when the instrument is not in use.

YVD10 Owner's Manual

Transportation and Installation

• Do not place the units in an unstable position where it

might accidentally fall over.

• Before moving the instrument, remove all connected

cables, to prevent damage to the cables or injury to

anyone who might trip over them.

• When setting up the instrument, make sure that the AC

outlet you are using is easily accessible. If some trouble

or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even

when the power switch is turned off, electricity is still

flowing to the product at the minimum level. When you

are not using the units for a long time, make sure to

unplug the power cord from the wall AC outlet.

• When moving the instrument, move it gently avoiding

shocks and impacts. The instrument is sensitive to

shocks and may become damaged.

2/2

DMI-7