Yamaha Clavinova CVP-403 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Yamaha Clavinova CVP-403. Yamaha Clavinova CVP-403 20 pages. The clavinova-computer connection
Également pour Yamaha Clavinova CVP-403 : Principes de base (4 pages), Procédure d'installation (2 pages)

Imprimer la page

Step 3 How do I connect the devices?

CAUTION

Before making any connections, make sure that the power to the Clavinova and the com-

puter is turned off. Connect a cable and set the [HOST SELECT] switch. Turn on the power

ﬁrst to the computer, then to the Clavinova.

If you are not using the connection between the Clavinova and your computer, you must disconnect the

cable from the [TO HOST] connector or [USB] connector. The Clavinova may not operate correctly if a cable

is left connected.

If the Clavinova or the connected computer does not operate correctly after you make connection, the

power to the computer may be turned off, the cable may not be connected appropriately, the [HOST

SELECT] switch may not be set correctly, or the driver or MIDI application program on the computer may

not function.

In this case, turn off the power to the Clavinova and the computer, and check the cable connection and the

[HOST SELECT] switch setting. Then, turn on the power ﬁrst to the computer, then to the Clavinova and

check to see if the driver or the MIDI application program functions correctly on the computer.

The connectors that can be used will depend on the setting of the HOST SELECT switch.

HOST SELECT switch setting

[MIDI]

[PC-2], [PC-1], or [Mac]

[USB]

Table of Contents

Usable connectors

[MIDI] connectors (all: [IN][OUT][THRU])

[TO HOST] connector

[USB] connector

What is MIDI?

Possibilities

Connections

Glossary

Software