Yamaha H01AG Manuel du propriétaire - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha H01AG. Yamaha H01AG 30 pages. Quick operation guide
Également pour Yamaha H01AG : Manuel d'utilisation rapide (2 pages)

Imprimer la page

Keyboard Stand Assembly

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble the unit in the appropri-

ate sequence.

• Assembly should be carried out by at least two persons.

• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Do not use any other

screws. Use of incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten all screws upon completing assembly of each unit.

• To disassemble, reverse the assembly sequence.

Remove all parts from the box. Conﬁrm that all parts shown in the illustration are provided.

CAUTION

Be careful not to pinch your ﬁn-

gers when setting the instrument

on the ﬂoor.

Place A on top of the pads.

1-1

Locate two pads (F) so that they will be posi-

tioned about 30 cm inside from the left and right

edges of A.

H01 Owner's Manual

Have a Phillips-head (+) screwdriver ready.

6 x 30 mm long screws x 4

6 x 20 mm short screws x 10

4 x 6 mm small screws x 6

Before starting installation, remove the vinyl ties that

bundle the pedal cord and AC power cord.

Remove two rectangle pads (800 x 130 mm) from the

packing box.

1-2

Place A on top of the pads.

CAUTION

Do not position the pad under the control panel.

30 cm

pads

30 cm