Yamaha KX61 Manuel du propriétaire - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha KX61. Yamaha KX61 49 pages. Usb keyboard studio
Imprimer la page
Selecting/Editing a Control Template
When using the DAW other than Cubase, the Control Template on the KX is not selected automatically by the
DAW operation on the computer unlike the Cubase, meaning that you need to select a Control Template
manually via the panel operation on the KX.
When using any DAW including Cubase, you can edit the Control Template to change the type of the
message generated via the knob operation and functions assigned to the knobs.
NOTE
Using the KX Editor (page 6) which can be downloaded from Yamaha web site, lets you edit all the Control
Templates.
Selecting a Control Template
1.
Press the [CONTROL TEMPLATE] button.
The LED lamp lights and the Control Template
selection display appears.
Lighting
In this state, you can select the Control Template.
NOTE
When the different display appears even if
pressing the [CONTROL TEMPLATE]
button, press the [CONTROL TEMPLATE]
button again or press the SELECT [▲]
button once or twice to call up the Control
Template selection display.
2.
Use the DATA [DEC] and [INC] buttons to
select the desired Control Template.
NOTE
You can increase the value by 10 by
simultaneously holding down the [DEC]
button and pressing the [INC] button, while
you can decrease the value by 10 by
simultaneously holding down the [INC]
button and pressing the [DEC] button.
3.
Press the [EXIT] button to return to the
original display.
The LED lamp of the [CONTROL TEMPLATE]
button will be turned off.
In this state, the VSTi parameters according to
the template selected in step 2 are assigned to
the CONTROL knobs.
Using the KX with Cubase
Changing the message type
generated by using the CONTROL
knob (Editing a Control Template)
You can select the type of the MIDI messages
generated and transmitted by controlling the
CONTROL knob: "Control Change (CC)" and "VSTi
Remote." Normally, the VSTi can be controlled by
the Control Change or VSTi Remote.
Control Change ......... The MIDI Control Change
messages adjust the VSTi
parameters.
VSTi Remote .............. The automation function of
the VSTi adjusts the VSTi
parameters.
The KX provides the Control Templates each of
which includes the settings most appropriate for
each VSTi. Note that the settings of each template
can be edited as desired.
NOTE
· The VSTi Remote function is available
only when using the Cubase 4 / Cubase
Studio 4 / Cubase AI4.
· The setting here is to be store on internal
memory automatically (without the store
operation). If you want to back up the
setting here, use the KX Editor (page 6) to
store the setting to a computer.
1.
Press the [CONTROL TEMPLATE] button.
The LED lamp lights and the Control Template
selection display appears.
NOTE
When the different display appears even if
pressing the [CONTROL TEMPLATE]
button, press the [CONTROL TEMPLATE]
button again or press the SELECT [▲]
button once or twice to call up the Control
Template selection display.
2.
Use the DATA [DEC] and [INC] buttons to
select the desired Control Template.
3.
Use the SELECT [▲] and [▼] buttons to call
up "KnobOutSel."
Owner's Manual
23