Yamaha AX-497 Manuel du propriétaire - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha AX-497. Yamaha AX-497 23 pages. Stereo amplifier
Également pour Yamaha AX-497 : Manuel d'entretien (36 pages), Manuel du propriétaire (24 pages)
Imprimer la page
Rear panel
1
2
TUNER
(PLAY)
TAPE
OUT
PHONO
(REC)
GND
(PLAY)
MD
OUT
(REC)
AUX
CD/DVD
1 PHONO jacks and GND terminal
See page 8 for connection information.
2 Audio input/output jacks
See page 8 for connection information.
3 AC OUTLET(S)
Use to supply power to your other audio/video
components.
See page 10 for details.
4 AC power supply cord
See page 10 for connection information.
5 SPEAKERS terminals
Connect one or two speaker sets.
See page 8 for connection information.
6 IMPEDANCE SELECTOR
See "IMPEDANCE SELECTOR switch" on this page.
■ Asia and General models only
VOLTAGE SELECTOR is only applicable to the Asia and
General models.
VOLTAGE SELECTOR
See page 10 for details.
IN
SPEAKERS
+
–
A
IN
B
5
–
+
IMPEDANCE SELECTOR
A OR B: 4ΩMIN / SPEAKER
A+B: 8ΩMIN / SPEAKER
A OR B: 6ΩMIN / SPEAKER
6
■ IMPEDANCE SELECTOR switch
CAUTION
Do not change the IMPEDANCE SELECTOR switch
while the power of this unit is turned on, as doing so may
damage the unit.
If this unit fails to turn on, the IMPEDANCE SELECTOR
switch may not be fully slid to either position. If this is the
case, slide the switch all the way to either position when
this unit's power supply is completely cut off.
Select the switch position (left or right) according to the
impedance of the speakers in your system.
Switch
position
Asia model
• If you use one set (A or B), the impedance of
each speaker must be 8
• If you use two sets (A and B), the impedance
of each speaker must be 16
Canada model
• You can use one set (A or B), and the
Right
impedance of each speaker must be 6
higher.
Other models
• If you use one set (A or B), the impedance of
each speaker must be 6
• If you use two sets (A and B), the impedance
of each speaker must be 12
• If you use one set (A or B), the impedance of
each speaker must be 4
Left
• If you use two sets (A and B), the impedance
of each speaker must be 8
CONTROLS AND FUNCTIONS
3
4
AC OUTLETS
SWITCHED
100W MAX. TOTAL
(U.S.A. model)
Impedance level
Ω
or higher.
Ω
or higher.
Ω
or
Ω
or higher.
Ω
or higher.
Ω
or higher.
Ω
or higher.
7