Yamaha AX-592 Manuel du propriétaire - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha AX-592. Yamaha AX-592 24 pages. Natural sound stereo amplifier

Imprimer la page

Using the PURE DIRECT switch

You can enjoy the purest possible sound from your sources by

setting this switch so that the indicator illuminates. The signals

bypass the BASS, TREBLE, BALANCE and LOUDNESS

controls, the SUBSONIC FILTER switch ( AX-592 and AX-892

only ), and the PRE OUT/MAIN IN terminals ( AX-592 and AX-

892 only ), eliminating any alterations to the signals.

PURE DIRECT

Using the CD DIRECT AMP switch

For the best CD sound, set this switch so the indicator

illuminates. The CD input signal is sent to a separate circuit,

bypassing the INPUT selector, BASS, TREBLE, BALANCE

and LOUDNESS controls, SUBSONIC FILTER switch (AX-592

and AX-892 only), and the PRE OUT/MAIN IN terminals ( AX-

592 and AX-892 only ) and then goes directly to the amplifier.

This signal routing ensures the purest CD sound, eliminating

any alterations to the original CD signals.

CD DIRECT AMP

Note

If both the CD DIRECT AMP and PURE DIRECT switches are

on, only the CD DIRECT AMP switch will function.

WARNING

When the LOUDNESS control has been set, if the PURE DIRECT switch or the CD DIRECT AMP switch is pressed, the sound

will suddenly increase and may damage your ears or the speaker (the LOUDNESS control function may be bypassed).

Therefore, only press the PURE DIRECT switch or the CD DIRECT AMP switch after lowering the volume or after checking

that the LOUDNESS control is properly set.

Setting the SUBSONIC FILTER switch

AX-592 and AX-892 only

When this switch is set ON, undesirable ultra-low-frequency

signals caused by turntable rumble or warped records can be

eliminated without losing sound quality.

SUBSONIC

Using the MUTING switch

AX-892 only

Selecting ON temporarily reduces the volume.

MUTING

OFF

FILTER

OFF