Yamaha CX-A5200 Manuel du propriétaire - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha CX-A5200. Yamaha CX-A5200 28 pages. Av
Également pour Yamaha CX-A5200 : Exemple de connexion (2 pages)

Imprimer la page

INPUT (XLR) jack

For connecting to a pre-amplifier with XLR output jacks (p.14).

To use the XLR jack, set the corresponding BAL/UNBAL switch to

"BAL".

When connecting an XLR balanced cable, match the pins and insert

the "male" connector of the cable until you hear a click.

XLR balanced cable (male)

• When disconnecting the cable from the unit, hold down the PUSH

button on the unit and then pull the connector out.

About the XLR jacks

• The pin assignments for the XLR jacks of the unit are shown below.

Before connecting an XLR balanced cable, refer to the instruction

manual of your pre-amplifier and verify that its XLR output jacks are

compatible with the pin assignments.

2. HOT

1. GND

3. COLD

INPUT (RCA) jack

For connecting to a pre-amplifier with RCA output jacks (p.14).

To use the RCA jack, set the corresponding BAL/UNBAL switch to

"UNBAL".

RCA cable

RCA short pin

L .

U N B A

B A L .

• Remove the RCA short pins attached to the INPUT (RCA) jacks before

making connections. Be sure to keep them in a place inaccessible to

small children who may accidentally swallow small parts.

• To protect against noise contamination, we recommend attaching

the RCA short pins when the INPUT (RCA) jacks are not in use.

BAL/UNBAL switch

Switches between XLR input and RCA input for each channel (p.14).

Part names and functions