Yamaha DG-Stomp Manuel du propriétaire - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha DG-Stomp. Yamaha DG-Stomp 32 pages. Guitar pre-amplifier with effects
Également pour Yamaha DG-Stomp : Manuel complémentaire (1 pages), Manuel d'entretien (43 pages)
Imprimer la page
Connections
Before making any connections to any of the DG-Stomp's INPUT and/or OUTPUT jacks,
make sure that the power on the DG-Stomp and all other devices is turned OFF to prevent
electrical shock or damage to the devices.
Connecting the Power
Use the supplied power adaptor (AC-10) to supply
power to the DG-Stomp.
1. Make sure the DG-Stomp's Power Switch
(STAND-BY) is in the OFF (
2. Connect the power adaptor's plug to the AC IN
jack on the DG-Stomp.
3. Connect the power adaptor to an electric outlet.
OFF (
)
Electrical
Outlet
Only use the supplied AC-10 adaptor to
power the unit.
Using another adaptor may result in dam-
age, overheating or fire, which can be
very dangerous.
Make sure to use the recommended AC
voltage as indicated on the power adap-
tor.
The supplied power adaptor AC-10 is de-
signed specifically for use with the DG-
Stomp. Never use this adaptor with any
other device.
10
) position.
Supplied AC
Adaptor AC-10
Connecting an Amp and Speaker
System
To setup with your guitar amp system, connect the
OUTPUT jack on the DG-Stomp to a power amp
and speaker.
1. Use a cable to connect the OUTPUT (R, L/
MONO) jack(s) on the rear panel of the DG-
Stomp to the INPUT jack of a power amp.
* We recommend the use of a stereo audio device to enjoy the
full benefits of the stereo effects.
2. Connect a speaker to the speaker jack on the
power amp.
* Make sure that the speaker connected to the power amp is
a compatible device (capacity, system impedance).
You can connect the DG-Stomp to a
guitar amp.
* If the guitar amp is equipped with an effects loop, we recom-
mend that the DG-Stomp be connected directly to the
amplifier's EFFECT RETURN jack. If the amplifier is not
equipped with an effects loop, connect to its INPUT jack and
adjust the tone and volume on the guitar amp as required.
* When connecting to monaural input devices, use the DG-
Stomp's L/MONO jack.
You can also connect to the input jack
on a mixer, etc.