Yamaha KAX-2500 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha KAX-2500. Yamaha KAX-2500 16 pages. Owner's manual

Thank you for your purchase of the YAMAHA KAX-5000, KAX3500 or KAX-2500 power amplifier.

These KAX-series amplifiers fully incorporate Yamaha's renown technological expertise, and offer

high reliability, rock-solid stability, and superb acoustic characteristics-all in a trim, 2U-sized pack-

age.

Features

• With two types of input jacks (balanced XLR and balanced phone) and three types of output jacks

(Speakon, 5-way binding post, and phone), the KAX-series is suitable for a wide variety of applica-

tions and installed systems.

• The unit offers three operating modes: STEREO (where Channels A and B operate independently),

PARALLEL (where the unit outputs a mono source through twin amplifier systems), and BRIDGE

(where the unit operates as a single high-power amp).

• Each channel is equipped with an independent OFF/LOW CUT/SUBWOOFER switch-where LOW

CUT engages a high-pass filter, and SUBWOOFER engages a low-pass filter. With LOW CUT or

SUBWOOFER selected, you can adjust the cutoff frequency from 25 to 150 Hz.

• Each channel has its own SIGNAL and CLIP indicators.

• The PROTECTION indicator lights up-and sound output is automatically muted-whenever the

unit's protective circuitry is operating. The TEMP indicator lights up if the unit is running hot.

• Variable-speed low-noise fans ensure high reliability.

This Owner's Manual covers the three models: KAX-5000, KAX-3500 and KAX-2500 power amplifi-

ers. Please read through this manual carefully before beginning use, so that you will be able to take full

advantage of the amplifier's superlative features and enjoy trouble-free operation for years to come.

After reading through the manual, please store it in a safe place.

Introduction

Contents

Controls and Functions ..................................... 6

Speaker Connections ........................................ 9

Rack Mounting ................................................ 11

Specifications .................................................. 12

Troubleshooting ............................................... 15

Front Panel .......................................................... 6

Rear Panel ........................................................... 7

Speaker impedance ............................................. 9

Wiring ................................................................ 10

General Specifications ....................................... 12

Block Diagram ................................................... 13

Dimensions ........................................................ 14

Current Draw ..................................................... 14