Clark GP127 Manuel d'entretien - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Clark GP127. Clark GP127 13 pages.

Imprimer la page
Group 00, Engine
Service Precautions
Match Marks
Mark parts with match marks before disassembly to
guide reassembly. However, be careful not to place
match marks where they could harm the function of a
part.
Special Tools
Be sure to use special tools when their use is speci-
fied.
Using substitute tools will result in malfunction of or
damage to the part.
Tightening Torque
Tighten the part properly to specified torque.
Replacement
Parts
When oil seal, O-ring, packing, or gasket have been
removed, be sure to replace them with new parts.
However, rocker cover gasket may be reused if it is
not damaged.
Rubber Parts
Do not stain timing belt and V-belt with oil or water.
Do not clean the pulley or sprocket with detergent.
Oil and Grease
Before reassembly, apply specified oil to the rotating
and sliding parts.
Sealant Specifications
Use specified brand of sealant.
Use of sealant other than specified sealant may cause
water or oil leaks.
Specified sealant
Rocker cover
3M ATD Part No. 8660 or equivalent
Semicircular
3M ATD Part No. 8660 or equivalent
packing
Engine support 3M ATD Part No. 8660 or equivalent
bracket bolt
Oil pan gasket Mitsubishi Genuine Part MD970389
or
equivalent
Water outlet
Mitsubishi Genuine Part MD970389
or
fitting
equivalent
Engine coolant 3M ATD Part No. 8660 or equivalent
temperature
gauge unit
Engine coolant 3M Nut Locking Part No. 4171
temperature
or equivalent
sensor
Oil pressure
3M ATD Part No. 8660 or equivalent
switch
Oil pressure
3M ATD Part No. 8660 or equivalent
gauge unit
SM 619,
Jan
'98
Engine
l
00-3-23