Directechs DB3 Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directechs DB3. Directechs DB3 19 pages. 2011 subaru outback - 403.subaru2 1.25
Également pour Directechs DB3 : Manuel d'installation (20 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (10 pages), Manuel d'instruction (17 pages)

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Ensure vehicle is in a safe location and cannot move forward during programming. For

vehicles equipped with a manual transmission, make sure the gearshift is in the neutral

position.

The harnesses must be connected in this exact order:

a) Connect the 14-pin.

b) Connect the 12-pin.

c) Connect the 10-pin.

When the LED turns on solid red, proceed with the next step.

Press the PTS button twice (2) to turn the ignition ON.

The LED will flash green quickly.

Wait for the LED will turn on solid green for 3 seconds and then turn off.

Press the PTS button once (1) more to turn the ignition OFF.

Note: Vehicle must be locked and armed for at least 45 seconds before remote starting.

See "Pre-installation and application warnings" for additional information.

You have successfully completed the module programming sequence.

403.HKRS03 1.03 2021 Kia K5 2.5L Turbo (Smart Key)