Directechs DIRECTWIRE 403.NISS08 Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directechs DIRECTWIRE 403.NISS08. Directechs DIRECTWIRE 403.NISS08 17 pages.

Imprimer la page
Module programming for convenience features only (skip transponder)
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
1
Ensure vehicle is in a safe location and cannot move forward during programming.
The harnesses must be connected in this exact order:
1. Connect the 14-pin.
2
2. Connect the 12-pin.
3. Connect the 10-pin.
When the LED turns on solid red, proceed with the next step.
Press the programming button five (5) times.
3
The LED turns ON solid orange.
4
Press twice (2) on the Push-to-Start (PTS) button to turn the ignition ON, then the LED shuts OFF.
5
Press once (1) more on the PTS button to turn the ignition OFF.
You have successfully completed the module programming sequence.
10
403.NISS08 1.27 2014 Nissan Altima (Smart Key)
©2023 Directed. All rights
Solid
Connect
Solid
Press &
Release x5
Off