Yamaha YST-SW005 Manuel du propriétaire - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha YST-SW005. Yamaha YST-SW005 19 pages. Yamaha subwoofer system owner's manual
Également pour Yamaha YST-SW005 : Manuel du propriétaire (20 pages), Manuel d'entretien (16 pages), Manuel d'entretien (13 pages)
Imprimer la page
Caution: Plug in the subwoofer and other components after all connections are completed.
● All connections must be correct, that is to say L (left) to L, R (right) to R, "+" to "+" and "–" to "–". Also refer to the owner's
manual for each of your components.
● Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to pages 4 and 5 for details.)
If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the
amplifier. (Refer to pages 6 and 7 for details.)
Connecting to line output (pin jack) terminals of the amplifier
Connect the main speakers to the speaker output terminals of the amplifier.
● To connect with a YAMAHA DSP amplifier (or AV
receiver), connect the SUBWOOFER (or LOW PASS etc.)
terminal on the rear of the DSP amplifier (or AV receiver)
to the L/MONO INPUT2 terminal of the subwoofer.
Using one subwoofer
Left main
Subwoofer
speaker
Amplifier
4
E-
CONNECTIONS
VOLUME
0
10
AUTO
HIGH
STANDBY
HIGH CUT
LOW
HIGH
LOW
OFF
INPUT2
INPUT2
/MONO
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
POWER
ON
OFF
To AC outlet
● When connecting the subwoofer to the SPLIT
SUBWOOFER terminals on the rear of the DSP amplifier,
be sure to connect the L/MONO INPUT2 terminal to the
"L" side and the R INPUT2 terminal to the "R" side of the
SPLIT SUBWOOFER terminals.
/MONO
SUBWOOFER
(LOW PASS)
SPLIT SUBWOOFER
Right main
speaker