Directechs DB3 Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directechs DB3. Directechs DB3 19 pages. 2011 subaru outback - 403.subaru2 1.25
Également pour Directechs DB3 : Manuel d'installation (20 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (10 pages), Manuel d'instruction (17 pages)

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Wait until the LED turns ON solid red.

Note: To skip the transponder programming and use convenience features only, press

the programming button 5 times. When the LED turns ON solid orange, proceed to

step 2.

Insert and turn the key to the ON position. The LEDflashes orange thenturns ON solid

green for 3 seconds, then turns OFF. This may take up to 1 minute.

Turn the vehicle ignition OFF and remove the key once the module is successfully

programmed.

You have successfully completed the module programming sequence.

403.GM11 1.20 2014 Buick Enclave