Directed DBALL Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directed DBALL. Directed DBALL 14 pages.

Imprimer la page
Directed DBALL Manuel d'installation
Platform: DBALL/DBALL2
Firmware:
CHRYSLER6 Range Extender Ready (RXT) Installation

Installation without T-Harness

(-) Ground, pin 4
CAN C High: Gray/White, pin 6,
CAN IHS High:
Gray, pin 3
1
9
[1] If grounded, the vehicle will NOT start.
With the exception of the OBDII Diagnostic connector, all connectors are displayed from the wire side.
OBDII
8
Diagnostic
Connector
16
HS CAN High: Tan/Black: 3
HS CAN Low: Tan: 4
HS CAN2 High: Orange/Green: 5
HS CAN2 Low: Orange/Brown: 6
(+) 12V: Red: 13
(-) Ground: Black: 14
RF
Prog. Button
LED
Rev.: 20150827
DBALL/
DBALL2
You can connect to either a XL202
RFTD OR a SmartStart module.
Refer to the SmartStart/XL202
Installation Notes for more information.
© 2015 Directed. All rights reserved.
Page 3