Caliber HFG 509BTN Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Caliber HFG 509BTN. Caliber HFG 509BTN 17 pages.

FIRST USE OF THE DEVICE/INTRODUCTION

Power Supply

This unit is designed to operate on AC 100-240V～50/60 Hz household

mains supply.

Power of Remote Control

To use the remote control, please ensure the remote control battery

CR2032 (included) is installed properly and take the insulation clarity

paper out.(Once you stop to use the remote control, please Insert in it

same as before). Replace the remote control battery when it stops

working. It is highly recommended to use a good quality button cell.

BATTERY NOTE AND CARE

Danger of explosion if the battery is replaced incorrectly. Replace only

with the same type battery.

Only use a good quality known brand battery to ensure the longest life

and best performance.

If the remote is not to be used for an extended period of time, remove

the battery. An old or leaking battery can cause damage to the remote

and may void the warranty.

Do not dispose of batteries in fire. Batteries may leak or explode.

Do not try to recharge batteries that are not intended to be recharged;

they can overheat, rupture and leak (Follow battery manufacturer's

directions).

GETTING STARTED

WARNING: Do not apply power to the unit until all of your connections are

made.

1. Plug the AC cord plug into a convenient AC wall outlet.

2. The Pilot lamp on the bottom of the unit will lights up in Red color. The

unit enters into STANDYBY Mode.

3. Press the

power button turn on/off the unit.

4. Remove the AC cord out of the wall outlet if you want to switch off the

main voltage completely.