Caliber HSG 309BT Manuel - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Caliber HSG 309BT. Caliber HSG 309BT 4 pages.
Imprimer la page
BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE WITHIN
30 FEET.
SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK AND CONTROL FROM
YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
-
TURN ON THE UNIT BY THE "ON/ OFF" SWITCH.
- THE LED INDICATOR WILL FLASH TO INDICATE THE UNIT IS ON AND WAITING FOR PARING.
- THE LED INDICATOR WILL REMAIN LIT WHEN PAIRED.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOTH® DEVICE:
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE'S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE'S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER "0000"
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANOTHER DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
DISABLING THE CONNECTION:
TO UNPAIR A BLUETOOTH® DEVICE THAT IS ALREADY PAIRED, PRESS AND HOLD
THE PAIR KEY FOR A FEW SECONDS.
VOLUME CONTROL:
INCREASE AND DECREASE VOLUME USING THE VOLUME UP AND VOLUME DOWN KEYS
ON THE UNIT OR USING THE VOLUME CONTROLS ON YOUR BLUETOOTH® ENABLED
DEVICE.
*NOTE THAT IF THERE IS NO PLAYBACK, ENSURE THAT NEITHER THE UNIT NOR
YOUR BLUETOOTH® DEVICE ARE SET TO ZERO VOLUME AND THE CORRECT DEVICE
FOR PLAYBACK IS PAIRED.
SPEAKER OPERATION
- TURN ON THE UNIT BY THE "ON/ OFF" SWITCH.
- PRESS THE PLAY/PAUSE KEY
- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/PAUSE KEY
OPERATION. PRESS AGAIN TO RESUME OPERATION AT THE SAME TRACK & POSITION.
- ADJUST THE VOLUME LEVEL BY PRESSING THE VOLUME UP OR VOLUME DOWN
KEYS AS DESIRED.
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE THROUGH
THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE A STANDARD STEREO HEADPHONE
(3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE "HEADPHONE-OUT OR AUDIO
LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET OF THIS UNIT.
- SWITCH ON THE EXTERNAL DEVICE (eg. MP3-PLAYER).
- INSERT THE 3.5MM STEREO PLUG INTO THE AUX-IN JACK IN THE REAR OF THE UNIT.
THIS WILL SWITCH OFF THE BLUETOOTH® FUNCTION & ACTIVATE THE AUX-IN MODE.
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE UNIT TO THE DESIRED LEVEL.
- REMEMBER TO UNPLUG THE 3.5MM AUX-IN PLUG FROM THE UNIT WHEN YOU ARE
FINISHED USING THE EXTERNAL DEVICE, TO SWITCH BACK TO BLUETOOTH® MODE.
TO START PLAYBACK.
PLUG-IN TO CHANGE
TO AUX-IN MODE
UNPLUG TO CHANGE
TO BLUETOOTH® MODE
E-4
TO PAUSE