Caliber 13576 Manuel d'instructions de montage - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Caliber 13576. Caliber 13576 10 pages. Sled wheels
Également pour Caliber 13576 : Manuel d'instructions de montage (8 pages)
Imprimer la page6. Place a ¼" square nut (15) in the T-slot of the T-Handle and then slide a Telescoping handle onto the T-handle,
lining up the nut with the hole in the Telescoping Handle. Install a ¼-20 x 0.5" screw (12) and ¼" washer (16).
Use Table 2 to find the extension for your ski. Move the telescoping handle to the correct location per the table.
The image below shows the end of the telescoping handle at 7". Tighten the screw (approximately 4 ft-lbs). If
your ski is not in the table, the saddle/latch should be at about 7-8", and the handle will be adjusted to fit the ski
later.
- Page 5 -
Assembled on May 19, 2020
CI05067, rev E