Directed AS-3472TW Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Directed AS-3472TW. Directed AS-3472TW 20 pages.

Imprimer la page

To exit Cold Weather Mode, do any one of the following actions:

• Open the hood.

• Start the engine remotely.

• Turn the ignition key to the IGNITION ON (RUN) position.

• Or by using the remote as so:

2-way remote

a. Press and release

disappears from the display.

1-way remote

b. Rapidly press AUX twice. While the remote's LED is flashing, press and hold

parking lights flash for 2 seconds, pause, and then flash once.

To verify whether the system is in cold weather mode:

• The

icon should appear on your remote display.

• (Automatic transmissions only) Press the brake pedal: If the vehicle is in Cold Weather

mode, the parking lights will remain ON while the brake pedal is pressed.

Extended Run Time

While the vehicle is running remotely, press and hold the

This will reset the run time counter to zero and restart the run time cycle from the beginning.

Note: The extended run time procedure can only be carried out once per remote start.

To stop the vehicle, at any moment, simply press and release the

Example: If your remote car starter is programmed for a run time of 3 minutes and your vehicle has

been running for 2 minutes already, pressing the

the engine to run for another cycle (in this case, 3 minutes).

Disable/Enable LED flashing

To disable the LED: Press

2 seconds, then beeps once again. Release the buttons. The parking lights will flash 3 times.

To Enable the LED: Press

2 seconds, then beeps once more. Release the buttons. The parking lights flash once.

Temperature Request (If ACC-Temp-100 installed)

The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp-

100) is installed:

Through the remote's advanced function menu (page-6), select L-01.

Immediately press the

LCD screen.

Advanced Features: Installation-programmable Options

The remote starter was designed with flexibility and OEM integration in mind. With its program-

mable options, this unit can single-handedly control nearly any electrical system in your vehicle.

Caution

: The programming of your system should be left to a professional. Changing any one of

the settings may affect the operation of your remote starter.

P.14

to select L-01. Press and hold the

button will reset the counter to zero and allow

and

simultaneously until the remote beeps once, pauses for

and

simultaneously until the remote beeps once, pauses for

button and hold it until the temperature is displayed on the

button until the

button until the remote beeps 3 times.

button.

icon

until the

User Guide