Clarke 6462180 Manuel d'utilisation et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 6462180. Clarke 6462180 17 pages.

MAINTENANCE AND SERVICING

WARNING: BEFORE PERFORMING ANY MAINTENANCE TASKS ENSURE THE

PLUG HAS BEEN REMOVED FROM THE MAINS SUPPLY.

1. Check that the power cable is free from cracks, bare wires etc. Avoid using

solvents when cleaning plastic parts. Most plastics are susceptible to

damage from solvents.

2. Ensure all screws remain tight to ensure the jigsaw is in safe working

condition.

• All bearings etc, in this machine are lubricated with a sufficient

amount of high grade lubricant for the tools lifetime under normal

operating conditions, therefore no further lubrication is required.

• Only use the replacement blades specified for this product

available from your CLARKE dealer.

3. After use, clean all dust and wood dust from the saw. To ensure constant

air circulation, always keep air vents clear of blockages, (use compressed

air to clean the machine if possible. (Wear PPE when using compressed

air).

4. Keep the sole plate free from dirt and grime. Regularly clean to prevent

scratches and scores on the surface.

5. Resin and glue on the blade causes poor cutting results. If necessary clean

the blade after use.

6. Refer to your CLARKE dealer if internal maintenance is required.

Replacement blades are available from your CLARKE dealer as follows:

Wood - 6462188

Metal - 6462190

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]