Clarke 6462182 Instructions d'utilisation et d'entretien - Page 12
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 6462182. Clarke 6462182 20 pages.
Imprimer la page
MAINTENANCE
CLEANING
1. Ensure all air vents are clear, (use compressed air to clean the machine if
possible).
2. After use, clean all dust or wood chippings from the jigsaw.
3. Make sure that the base plate is free from dirt and grease.
4. The blade locating clip and support roller should be kept clean and lightly
oiled at regular intervals.
5. Keep the handle clean and free from oil and grease.
6. Resin and glue on the blade causes poor cutting results. Clean the blade
after use if necessary.
GENERAL MAINTENANCE
1. Ensure all fixing screws remain tight to ensure the jigsaw is in safe working
condition.
2. Check the power cable to ensure it is sound and free from cracks, bare
wires etc. Avoid using solvents when cleaning plastic parts, most plastics
are susceptible to damage from the various types of commercial solvents.
• All bearings etc, in this tool are lubricated with a sufficient amount
of high grade lubricant for the tools lifetime under normal
operating conditions, therefore no further lubrication is required.
• Refer to your CLARKE dealer if internal maintenance is required.
• Only use the replacement blades specified for this product (consult
your CLARKE dealer).
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
12