ALDI OL 350-L-17 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ALDI OL 350-L-17. ALDI OL 350-L-17 19 pages. A3 laminator

1. Take the laminator out of the packaging.

2. Check whether the laminator or the individual parts exhibit damage. If this is the

case, do not use the laminator. Contact the manufacturer at the service address

specified on the warranty card.

3. Check to make sure that the delivery is complete (see fig. A).

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating

pouch

. Do not position the laminator directly in front of a wall or other

objects.

2. Connect the mains plug to a properly installed socket with a protective conductor

(AC 240 V, 50 Hz = house connection).

1. Move the ON / OFF switch

The ready indicator

has reached the correct temperature for lamination.

The preheating time may vary depending on the ambient

temperature and air humidity.

2. Move the ON / OFF switch to "OFF" ( ) to switch the laminator off.

Operation

WARNING!

Risk of injury!

Handling the laminator improperly may result in injury.

− If an object (sleeves, tie etc.) is unintentionally taken into the

laminating pouch infeed slot, immediately disconnect the

mains plug.

NOTICE!

Risk of damage!

Improper handling of the laminator may lead to damage to the

laminator or documents.

to "ON" (―) to switch the laminator on.

will turn from black to red once the laminator