Clarke 7615103 Manuel d'utilisation et d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 7615103. Clarke 7615103 13 pages. 15 tonne hydraulic press
Imprimer la page
POSITIONING THE RAM
The ram can positioned as required
by sliding it along the top rail.
• Always position the ram directly
above the workpiece.
HYDRAULIC PUMP/RAM OPERATION
The pump is provided with two valves, operated by turning the respective
handwheel as shown.
Valve A is used for raising or lowering
the ram.
Turn the handwheel clockwise and
pump the handle to operate (or
lower) the ram. Turning the
handwheel anticlockwise releases
the pressure and the ram will rise.
Valve B is used to move the ram in
fast or slow mode.
Turn the handwheel clockwise and
pump the handle to move the ram quickly to the workpiece. Turning the
handwheel anticlockwise and pumping the handle moves the ram at a slower
rate.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5