Clarke CBS16 Manuel d'utilisation et d'entretien - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CBS16. Clarke CBS16 13 pages. Electric drill bit sharpener
Imprimer la page
GENERAL SAFETY RULES
WARNING: WHEN USING ELECTRIC TOOLS, MACHINES, OR EQUIPMENT,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE
THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY.
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. Keep work area well lit.
2. NEVER use power tools in damp, wet, or poorly lit locations. Don't expose to rain. Do
not use electrically powered tools in the presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cable.
4. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for
which it was intended.
6. DRESS PROPERLY. Do not wear loose clothing or jewellery which could be caught in
moving parts.
7. USE EYE AND HAND PROTECTION. Always wear approved impact safety goggles.
8. DO NOT ABUSE THE POWER CABLE. Do not yank it to disconnect it from the socket. Do
not carry tools by the cable.
9. DISCONNECT POWER. Unplug when not in use, before servicing, and when changing
accessories.
10. AVOID UNINTENTIONAL STARTING. Be sure the switch is in the OFF position when not in
use and before plugging in.
11. STAY ALERT. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
12. CHECK DAMAGED PARTS. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Do not use the tool if the switch does not turn on and off
properly.
13. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces
such as pipes, radiators.
14. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool.
15. DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. If there is
any doubt, do not operate the tool.
16. KEEP AWAY FROM LIQUIDS. Tool is designed for dry sharpening operations only.
17. HEAT PRODUCED WHEN SHARPENING. The sharpening head and any bits being
sharpened will become hot. Be careful when handling; allow drill tips to cool before
storing.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3