Clarke CEW1000 Manuel d'utilisation et d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CEW1000. Clarke CEW1000 20 pages. Electric impact wrench
Imprimer la page
IMPACT WRENCH SAFETY INSTRUCTIONS
1. Use the wrench correctly. Only use the impact wrench in the manner and
for the functions described in these instructions.
2. Changing Sockets. Always disconnect the machine from the power
supply when changing sockets etc. Use only Impact Wrench sockets....DO
NOT use standard sockets.
3. Achieve the correct torque. Always finish tightening wheel nuts with a
torque wrench or suitable spanner to the wheel-nut torque as recom-
mended by the vehicle manufacturer.
4. Avoid excessive use of the wrench. When tightening a nut or bolt, never
allow the wrench to impact more than 8 times - to avoid over tightening -
3 to 4 impacts is sufficient.
5. Care of the mains cable. Keep the mains cable well away from the
machine and ensure an adequate electrical supply is close at hand so
that the operation is not restricted by the length of the cable.
6. Use outdoor extension leads. If working outdoors, always use an approved
cable extension suitable for the power rating of this tool (see specifica-
tions), the conductor size should also be at least the same size as that on
the machine, or larger. When using a cable reel, always unwind the cable
completely.
Additionally, please keep these instructions in a safe place for future reference.
6