Clarke CMFT20Li Manuel d'utilisation et d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CMFT20Li. Clarke CMFT20Li 17 pages. 20v cordless multi function tool
Imprimer la page
USING THE SCRAPER
In scraping mode, the tool can be used to remove materials such as paint,
sealant residues, adhesives, fabrics and vinyl from materials such as wood,
plastic, metal and painted surfaces.
1. Switch the tool on before it
touches the work piece.
2. Adjust the speed control to a
medium/high speed as required.
3. Place the tool on the workpiece,
ensuring the angle of the scraper
blade to the workpiece is correct.
4. Allow the tool to do the work and
do not apply a heavy pressure
which can cut into the surface
and overload the tool.
NOTE: The scraping blade is designed for scraping soft materials from flat
surfaces. Ensure you get the correct angle and only apply light
pressure to avoid cutting the surface.
NOTE: The scraper blade is quite sharp and tends to remove the surface
from soft materials such as timber (acting in a similar way to a chisel).
Great care should therefore be taken when removing coatings from
these types of materials.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11