Directed Directechs DB3 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directed Directechs DB3. Directed Directechs DB3 18 pages. Smart key for 2013 toyota highlander
Également pour Directed Directechs DB3 : Manuel d'installation (20 pages), Manuel d'installation (19 pages), Manuel (6 pages), Manuel d'installation (18 pages), Manuel d'installation (18 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (10 pages), Manuel d'installation (19 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (20 pages), Manuel d'installation (20 pages), Manuel d'installation (10 pages), Manuel d'installation (20 pages), Manuel d'installation (20 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (20 pages), Manuel d'installation (18 pages), Manuel d'installation (20 pages), Manuel d'installation (19 pages), Manuel d'installation (19 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (18 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (20 pages), Manuel d'installation (20 pages), Manuel d'installation (18 pages), Manuel d'installation (20 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (18 pages), Manuel d'installation (19 pages), Manuel d'installation (20 pages), Manuel d'installation (17 pages), Manuel d'installation (20 pages), Manuel d'installation (18 pages)

Imprimer la page
Directed Directechs DB3 Manuel d'installation
 

Push-to-Start (PTS) Vehicles

1
Ensure vehicle is in a safe location and cannot move forward during programming.
The harnesses must be connected in this exact order:
  a) Connect the 14-pin.
2
  b) Connect the 12-pin.
  c) Connect the 10-pin.
When the LED turns on solid red, proceed with the next step.
Important! Do not depress the brake pedal.
Press on the PTS button twice (2) to turn the ignition ON. It is important to wait for the LED to
3
start flashing green.
Note: Refer to the "LED Diagnostics" section for troubleshooting if the LED does not flash
green within 15 seconds.
4
Press on the PTS button once (1) more to turn the ignition OFF.
Press Lock or Unlock on the factory transmitter.
5
The LED will turns ON solid green OR orange for 3 seconds and then turn off.
You have successfully completed the module programming sequence.
11
403.CHRYSLER 7.36 2013 Chrysler 200
©2023 Directed. All rights