Zanussi ZC 245 RM Livret d'instructions - Page 7

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZC 245 RM. Zanussi ZC 245 RM 9 pages. Fridge zc 245 rm

Imprimer la page

CUSTOMER SERVICE AND SPARE PARTS

If the appliance is not functioning properly, check

that:

the plug is firmly in the wall socket and the mains

power switch is on;

there is an electricity supply (find out by plugging

in another appliance);

the thermostat knob is in the correct position.

If there are water drops on the bottom of the

cabinet, check that the defrost water drain

opening is not obstructed (see ÒDefrostingÓ

section).

INSTALLATION

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

For safety reasons, minimum ventilation must be as

shown in Fig.

Appliance positioned under overhanging kitchen wall

units (see Fig. A).

Appliance positioned without overhanging kitchen

wall units (see Fig. B).

Attention: keep ventilation openings clear of

obstruction.

Two adjustable feet at the cabinet base allow

accurate levelling of the appliance.

Rear spacers

In the bag with the documentation, there are two

spacers which must be fitted as shown in the

figure.

Slacken the screws and insert the spacer under the

screw head, then re-tighten the screws.

If your appliance is still not working properly after

making the above checks, contact the nearest

service centre.

To obtain fast service, it is essential that when you

apply for it you specify the model and serial number

of your appliance which can be found on the

guarantee certificate or on the rating plate located

inside the appliance, on the bottom left-hand side.

NP007

PR153