Zanussi ZD29/8DL3 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZD29/8DL3. Zanussi ZD29/8DL3 14 pages.

Installation

Positioning

• Place the refrigerator away from direct sunlight and

heat sources.

• Maintain recommended ventilation - see Fig. 1.

• Make sure the refrigerator is accurately levelled tur-

ning the adjustable feet in order to avoid vibrations

and noises, Fig. 2.

• This is a built in design to be aligned with other fur-

niture

Cleaning the interior

• Do not use alcohol or any cleanig product containing

alcohol because it can damage the cabinet.

• Before using the appliance for the first time wash the

interior with luke warm water and some neutral

soap so as to remove the typical smell of a brand-

new product arid then dry thoroughly.

• Do not use detergents or abrasive powders as these

will damage the finish.

• Remove security used for transportation.

mBefore plugging the appliance make sure that the

voltage and frequency shown on the «Technical

Features» correspond to your home supply.

mIt is essential that the appliance be efficiently

earthed.

For this purpose the supply cable plug incorporates

a special earth contact. If the sockets of your domestic

wiring system are not grounded, have the appliance

connected to a separate ground wire in accordance

with existing safety regulations.

«THE

MANUFACTURER

ACCEPT ANY LIABILITY IF THIS SAFETY

RULE IS NOT OBSERVED».

Starting – up

• Plug the appliance into the mains.

• Make sure the inner light turns on when opening the

door.

• Turn to intermediate position the knob of the «tem-

perature regulator»: «A».

DECLINES

Fig. 1

Fig. 2