Zanussi ZFC 1505 S Livret d'instructions - Page 6

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZFC 1505 S. Zanussi ZFC 1505 S 10 pages. Refrigerator zfc 1505 s; zfc 1503 s

Imprimer la page

Aligning the worktop of the appliance with the

kitchen furniture

The appliance worktop is aligned with the door.

It can however be easily aligned to the kitchen

furniture by proceeding as follows:

unscrew the screws on the upper hinges that fasten

the worktop to the appliance.

Move the worktop to the desired position and

tighten the screws again.

Installation under the kitchen's work-top

Open the door.

Remove from the upper hinges the screws (F-

Fig. 6) that ﬁx the appliance's work-top.

Push the work-top (G) toward the back of the

appliance and remove it.

Remove the work-top's brackets (H) from the

appliance.

Unscrew the feet and ﬁt them in the openings

situated immediately behind (see Figure 7).

Fix the appliance to the kitchen's work-top, using

the openings on the upper hinges.

D155

D156

Fig. 6

Fig. 7

Important

For the appliance to function properly, an opening

of at least 137 cm

(Fig. 8) must be cut in the

kitchen worktop.

A minimum clearance must also be provided

between the condenser and the wall, as shown in

the Fig. 9.

min 137cm

D219

60 mm

PR122

Fig. 8

Fig. 9

min.

50 cm