Zanussi ZI 1611 Livret d'instructions - Page 9

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZI 1611. Zanussi ZI 1611 12 pages.

3. Open the door and push the appliance against the

side of the kitchen unit opposite to that of ap-

pliance hinges. Fasten the appliance with 4

screws provided in the kit included with the

appliance. Snap vent grille (C) and hinge cover (D)

into position.

D727

4. Apply covers (B) on joint cover lugs and into hinge

holes.

D013

5. Separate parts A, B, C, D as shown in the figure.

PR266

B B

6. Place guide (A) on the inside part of the furniture

door, up and down as shown in the figure and

mark the position of external holes. After having

drilled holes, fix the guide with the screws

supplied.

PR166

7. Fix cover (C) on guide (A) until it clips into place.

PR33/ 2

8. Open the appliance door and the furniture door at

90¡. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with ¯ 2 mm

at 8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

PR167

8mm