Zanussi ZNME36FW0 Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZNME36FW0. Zanussi ZNME36FW0 24 pages.
Imprimer la page
• A 5 minute delay function is applied to prevent damage to the compressor of your fridge
when connecting or disconnecting to mains, or when an energy breakdown occurs. Your
fridge will begin to operate normally after 5 minutes.
• Your appliance is designed to operate in the ambient temperature (T/SN = 10°C - 43°C)
intervals stated in the standards, according to the climate class displayed on the
information label. We do not recommend operating your appliance out of the stated
temperature limits in terms of cooling effectiveness.
Important installation instructions
This appliance is designed to work in difficult climate conditions (up to 43 degrees C or 110
degrees F) and is powered with 'Freezer Shield' technology
which ensures that the frozen food in the freezer will not
defrost even if the ambient temperature falls as low as -15
°C. So you may then install your appliance in an unheated
room without having to worry about frozen food in the
freezer being spoilt. When the ambient temperature returns
to normal, you may continue using the appliance as usual.
Accessories
Ice Tray
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely frozen, you can twist the tray as shown below to remove
the ice cubes.
The Freezer Box
The freezer box allows food to be accessed more
easily.
Removing the freezer box:
• Pull the box out as far as possible
• Pull the front of the box up and out
Carry out the opposite of this operation when
refitting the sliding compartment.
Always keep hold of the handle of the box while
removing it.
Climate class
EN -12-
Ambient (
16 to 43 (
T
16 to 38 (
ST
N
16 to 32 (
SN
10 to 32 (
Freezer boxes
C)
o
C)
o
C)
o
C)
o
C)
o