Zanussi ZR 304 CTN Livret d'instructions - Page 6

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZR 304 CTN. Zanussi ZR 304 CTN 10 pages.

Instructions to assemble the refrigerator door to

the kitchen unit door

Position the runners (C) at the top and bottom of

the inside of the kitchen unit as shown in Fig. 5 and

mark the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3.5x16 mm screws.

D135

Open both the appliance door and that of the

kitchen unit to approx. 90 .

Place the little plates over the runners. Hold the

doors of the appliance and the unit together and

mark the holes.

8mm

PR34

Fig. 5

Fig. 6

Remove the little plates and make the holes with a

diam. of 3,2 mm. Replace the little plates over the

runners and screw in the screws provided

(3.5x16 mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes.

At the end of the procedure, check that the doors of

the appliance and the kitchen unit open properly.

PR35

Using a screwdriver, release bracket (1). Unscrew

the bracket support (2) and ﬁt it on the opposite

side. Remove the door.

Unscrew the door stop (3) and screw it on the

opposite side.

Remove the upper bracket of the door (4) and insert

it on the opposite side.

Turn the door through 180 , reﬁt the door and the

lower bracket.

To ensure correct storage of food, the door is ﬁtted

with a simple spring device which holds it in the

open position until it is properly closed.

180°

PR232

Fig. 7

Fig. 8